top of page

UH13T Hovercraft

2 Hovercraft Available

13T green front.jpg
13T green side.jpg

UH-13T Hovercraft

(Green)

 

The UH-13T is a high-speed cruiser capable of speeds in excess of 55 mph. The lightweight rectangular design combination with a 2-stroke thrust engine allows the 13T to accelerate like a sports car over any terrain.  It maneuvers very well at high speed and at low speed in tight conditions.  

 

It’s powered by two engines. The lift fan is powered by a vertical shaft lawn tractor engine. The thrust propeller is powered by a 2-stroke snowmobile engine.

 

The construction is from wooden ribs and stringers covered in plywood. This construction technique is lightweight, strong and simple to maintain.

 

The thrust engine has been completely rebuilt. New stator, ported, new electronics & electric start.

 

Model:                                          UH-13T

Capacity:                                     2 to 3 Passengers

Payload:                                      700 Lbs

Speed:                                        55 mph

Hover Height:                            8 inches

Length:                                       13ft 8 in

Width:                                        6 ft  5 in

Empty Weight:                          550 Lbs

Flotation:                                    1400 Lbs

Climb Gradient:                         25%

Lift Engine:                                 12.5 hp Briggs & Stratton with electric start

Thrust engine:                           Kohler 440cc, 2-cycle

Construction Method:             Wood Rib’s and stringers with Plywood Skin

Thrust propeller:                      48 inches

Lift duct diameter:                  30 inches

 

Located in Connecticut, USA

 

Asking $ 3995

13T green rear.jpg
13T green engine.jpg

UH-13T Hovercraft

13T orange front.jpg
13T orange side.jpg

UH-13T Hovercraft

(Orange)

 

The UH-13T is a high-speed cruiser capable of speeds in excess of 55 mph. The lightweight rectangular design combination with a 2-stroke thrust engine allows the 13T to accelerate like a sports car over any terrain.  It maneuvers very well at high speed and at low speed in tight conditions.  

It’s powered by two engines. The lift fan is powered by a vertical shaft lawn tractor engine. The thrust propeller is powered by a 2-stroke snowmobile engine.

The construction is from wooden ribs and stringers covered in plywood. This construction technique is lightweight, strong and simple to maintain.

The thrust engine has been completely rebuilt. New pistons, rings & coils.

 

Model:                                          UH-13T

Capacity:                                     2 to 3 Passengers

Payload:                                      700 Lbs

Speed:                                        55 mph

Hover Height:                            8 inches

Length:                                       13ft 8 in

Width:                                        6 ft  5 in

Empty Weight:                          550 Lbs

Flotation:                                    1400 Lbs

Climb Gradient:                         25%

Thrust engine:                           12.5 hp Briggs & Stratton with electric start

Thrust engine:                          Rotax 640cc,  2-cycle

Construction Method:            Wood Rib’s and stringers with Plywood Skin

Thrust propeller:                     48 inches

Lift duct diameter:                  30 inches

 

Located in Connecticut, USA

 

Asking $ 3500

13T orange side rear.jpg
13T orange rear.jpg

Questions on the hovercraft above? Please use this form & specify which hovercraft your interested (Green or Orange)

Thanks for submitting!

bottom of page